Sil-Glyde Technician Grade Brake Lubricant – 8 oz Brush Top Can

Sil-Glyde Technician Grade is the professional brake-system silicone lubricant for caliper slide pins, pad backing plates, abutment clips, and shoe-to-backing-plate contact points. The 8 oz brush-top can is the right size for busy shops and multi-vehicle households – same brake-proven formula as the 4 oz BK-44, double the product so you stay stocked through back-to-back brake jobs.

Key Features

• Anti-Squeal Silicone Formula – eliminates brake squeal by lubricating slide pins, pad backs, and hardware contact points where metal-on-metal friction causes noise.
• Brake-Safe Chemistry – won't attack rubber dust boots, EPDM caliper seals, or piston seals; tested compatible with DOT 3 & DOT 4 brake fluid.
• High-Temperature Rating – effective from -40°F to 500°F; stays in place under repeated heavy braking and summer heat soak.
• Brush-Top Applicator – clean, precise placement on contact surfaces without contaminating rotor or pad friction faces.
• 8 oz Shop-Size Container – value-per-ounce advantage for fleet shops, performance garages, and frequent DIY brake jobs.

Where to Use It

• Caliper slide pins and guide bushings
• Brake pad backing plates (anti-squeal contact points only – never the friction surface)
• Brake pad abutment clips and anti-rattle hardware
• Drum brake shoe-to-backing-plate contact pads
• Parking brake cable ends and pivot points
• ABS sensor boot seating during installation

Pro Tip

Lubricate sliding contact surfaces only. Keep Sil-Glyde away from rotor surfaces and pad friction faces. A thin film on slide pins and pad backs is all that's required for a quiet, even-wearing brake system. The 8 oz brush top makes it easy to apply just the right amount every time.

WARNING: Reproductive Harm – www.P65Warnings.ca.gov