1702 Power Extractor – 2-Gallon Manual Vacuum Fluid Extractor
1702 Power Extractor – 2-Gallon Manual Vacuum Fluid Extractor
The Motive Products 1702 Power Extractor removes engine oil, ATF, gear lube, brake fluid, and coolant from the top without jacking the vehicle, removing skid plates, or crawling underneath. The 2-gallon (8-quart) translucent tank handles up to two full oil changes per session, and the built-in hand pump generates the vacuum needed without electricity or shop air.
Key Features
- 2-Gallon (8-Quart) Translucent Tank — enough capacity for two full engine oil changes or one large transmission evacuation; monitor fluid level through the tank wall.
- Integrated Hand Pump — generate and maintain vacuum anywhere: shop, driveway, boat dock, or paddock. No compressor or power required.
- Dipstick Probe — rigid ¼" OD tube drops straight into the dipstick tube for fast, complete oil removal from the sump.
- Flexible Vacuum Tube — routes into reservoirs, brake-fluid wells, power-steering tanks, and hard-to-reach sump locations; also compatible with vacuum brake-bleeding adapters.
- ¼" Diameter × ~3 ft Hose — reaches deep sumps in trucks, SUVs, and marine engines without extensions.
- Chemical-Resistant Seals — safe with synthetic and conventional motor oil, DOT 3/4 brake fluid, ATF, coolant, and gear lube.
- USA-Made & Rebuildable — Motive backs every unit with full replacement-parts support and a lifetime workmanship warranty.
Recommended Applications
- Topside engine oil changes on cars, trucks, boats, motorcycles, and ATVs — no lift needed
- Transmission and differential fluid evacuation before service fill
- Brake-fluid reservoir evacuation for bleed or flush procedures
- Power-steering and coolant reservoir extraction
- Mobile fleet service where lifts and pits aren't available
How It Works
Insert the dipstick probe or flexible tube into the fluid reservoir. Hand-pump the 1702 to the desired vacuum level and watch spent fluid transfer cleanly into the tank. When full, disconnect and dispose of used fluid per local regulations — no spills, no funnels, no mess.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
1702 Power Extractor – 2-Gallon Manual Vacuum Fluid Extractor
The Motive Products 1702 Power Extractor removes engine oil, ATF, gear lube, brake fluid, and coolant from the top without jacking the vehicle, removing skid plates, or crawling underneath. The 2-gallon (8-quart) translucent tank handles up to two full oil changes per session, and the built-in hand pump generates the vacuum needed without electricity or shop air.
Key Features
- 2-Gallon (8-Quart) Translucent Tank — enough capacity for two full engine oil changes or one large transmission evacuation; monitor fluid level through the tank wall.
- Integrated Hand Pump — generate and maintain vacuum anywhere: shop, driveway, boat dock, or paddock. No compressor or power required.
- Dipstick Probe — rigid ¼" OD tube drops straight into the dipstick tube for fast, complete oil removal from the sump.
- Flexible Vacuum Tube — routes into reservoirs, brake-fluid wells, power-steering tanks, and hard-to-reach sump locations; also compatible with vacuum brake-bleeding adapters.
- ¼" Diameter × ~3 ft Hose — reaches deep sumps in trucks, SUVs, and marine engines without extensions.
- Chemical-Resistant Seals — safe with synthetic and conventional motor oil, DOT 3/4 brake fluid, ATF, coolant, and gear lube.
- USA-Made & Rebuildable — Motive backs every unit with full replacement-parts support and a lifetime workmanship warranty.
Recommended Applications
- Topside engine oil changes on cars, trucks, boats, motorcycles, and ATVs — no lift needed
- Transmission and differential fluid evacuation before service fill
- Brake-fluid reservoir evacuation for bleed or flush procedures
- Power-steering and coolant reservoir extraction
- Mobile fleet service where lifts and pits aren't available
How It Works
Insert the dipstick probe or flexible tube into the fluid reservoir. Hand-pump the 1702 to the desired vacuum level and watch spent fluid transfer cleanly into the tank. When full, disconnect and dispose of used fluid per local regulations — no spills, no funnels, no mess.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
